Riverwoods homeowners get 1–2 day epoxy and polyurea installations from our nearby Northbrook branch. Diamond-ground prep, transparent pricing, and a limited lifetime warranty on garage installs — backed by 42 five-star Google reviews.
On-site visits within 48 hours
Riverwoods is served by our Northbrook office at 2970 Maria Ave #227 — about 15 minutes north. Same crew, same materials, same 5.0 Google rating (42 reviews) your North Shore neighbors trust.
Riverwoods’s housing stock is defined by contemporary and ranch homes on wooded, acre-plus lots between the Des Plaines River and the Ryerson Conservation Area, most with attached garages and full or walk-out basements — concrete that has endured decades of Lake County winters.
Sitting in the Des Plaines River and the Ryerson Conservation Area, many Riverwoods lots carry a high water table and seasonal moisture that pushes salts and minerals to the surface of unsealed slabs. Every winter, road salt from Deerfield Road, Milwaukee Avenue and the Tri-State gets tracked into local garages, accelerating pitting, dusting and spalling long before the damage is obvious.
Whether you’re refinishing a garage off Saunders Road, sealing a basement, or coating a backyard patio, you get transparent pricing, 1–2 day installs, and a limited lifetime warranty on eligible garage projects from a crew that knows Riverwoods’s concrete.
Residential garages, basements, retail spaces and patios — every surface gets diamond-ground prep.
Riverwoods garages take heavy road-salt runoff from Deerfield Road, Milwaukee Avenue and the Tri-State every winter. Our garage floor coatings start with diamond grinding, crack repair and joint filling, then a primer, decorative flake broadcast, and polyaspartic topcoat.
Many Riverwoods homes in the historic Third Street area and newer subdivisions include full basements used as family rooms and entertainment spaces. Our basement floor coatings seal raw concrete into a clean, stain-resistant surface — ideal for rec rooms, home gyms and workshops. We use a moisture-mitigating primer for below-grade slabs, with solid color, metallic or decorative flake topcoat options.
Our outdoor patio coatings use UV-stable polyaspartic resins that resist yellowing from the North Shore sun. Diamond-grind prep, crack repair and a textured slip-resistant finish for Riverwoods patios, walkways and side entries.
Riverwoods homeowners in the Royal Fox and Foxfield communities enjoy in-ground pools that need safe, attractive deck surfaces. Our pool deck coatings provide a textured, slip-resistant surface that stays cooler underfoot and resists chlorine, salt and pool chemicals. Applied over diamond-ground concrete for a long-lasting bond around pool aprons and wet zones.
Riverwoods' Main Street business district and Route 64 corridor host restaurants, boutiques and professional offices. We install high-performance epoxy and urethane systems in warehouses, parking structures, retail spaces and salons across Riverwoods and the Fox Valley. Same diamond-grinding prep as residential — we can phase installation around business hours to minimize downtime.
Real garage floor transformations from the Riverwoods area. Every project starts with full diamond-grinding prep.
Drag the line or use left / right arrow keys to reveal before vs. after
Near Riverwoods, IL · Epoxy polyaspartic · Polyurea topcoat
Google reviews from our office — honest feedback on our work.
I found Concrete Shield Coatings to be great to work with. Dimitri is so professional. They did all their work on time and on budget. Would highly recommend them.
Garage Floor CoatingThank you, Concrete Shield Coatings and Dimitri, for the experience and effort to refinish my garage floor with polyurea coating. Long-lasting and durable finish — they’ve done very neat work and had a professional approach to any concerns. They deserve all the stars!
Garage Floor CoatingVery professional. Outstanding workmanship. Timely completion. Highly recommend.
Garage Floor CoatingAll prep, materials and labor in one quote. What we quote is what you pay.
1-Car Garage
Approx. 250–300 sq ft
2-Car Garage
Approx. 400–500 sq ft
3-Car Garage
Approx. 600–750 sq ft
Commercial
Warehouses · Garages · Showrooms
Pricing reflects standard concrete in good condition. A free on-site visit locks in your exact number.
Extra prep for older coatings or damaged slabs is quoted separately — always before work begins.
Need a custom quote? Call (847) 999-6300 →
Straight answers for Riverwoods homeowners from our Northbrook-based coating team.
Epoxy flake runs about $5–$7/sqft and polyurea-polyaspartic flake $5.50–$7/sqft installed in Riverwoods, including surface preparation, materials and labor. For a standard two-car garage (roughly 400–500 sq ft), expect a total in the $2,000–$3,500 range.
Pricing varies based on concrete condition, the coating system you select, and design choices like flake blends or metallic finishes. We provide an exact written quote after an in-person inspection — no estimates over the phone.
Yes. Riverwoods garages near Deerfield Road, Milwaukee Avenue and the Tri-State take heavy salt exposure every winter. Our polyurea coatings create a seamless barrier that resists salt, calcium chloride and other de-icing chemicals.
Combined with our diamond-ground surface prep, the coating bonds mechanically to the concrete — no peeling or flaking even after years of freeze-thaw cycles. It’s the same system we’ve installed on over 1,000 projects across the North Shore.
Most residential garage projects in Riverwoods are completed in 1–2 days. Basements and patios may take 2–3 days depending on square footage and concrete condition.
With our polyurea systems, light foot traffic is typically possible 4–6 hours after the final coat. You can move furniture back within 24 hours and park vehicles after 48–72 hours, depending on the system and ambient temperature.
Clear the floor of vehicles, storage items and anything sitting on the concrete. We handle grinding, cleaning and all surface prep. If you have built-in shelving or heavy items that can’t be moved, let us know during your free estimate and we’ll plan around them.
For basement projects near the Des Plaines River and the Ryerson Conservation Area, make sure we have clear access to the space and adequate ventilation. We use low-VOC products, but good airflow helps the curing process.
Polyurea-polyaspartic coatings cure faster, flex with temperature changes, and resist UV yellowing better than standard epoxy. For Riverwoods garages facing Lake County freeze-thaw cycles and road salt, polyurea is usually the better long-term choice.
That said, epoxy systems remain a strong, budget-friendly option for interior basements where UV exposure isn’t a concern. We’ll recommend the right system during your free on-site evaluation.
Schedule online 24/7 or call (847) 999-6300. Our Northbrook branch at 2970 Maria Ave #227 serves Riverwoods and the entire North Shore. On-site visits are typically available within 48 hours.
Every estimate is free with no obligation. You can also use the quote form at the top of this page or click to book online.
Our Northbrook branch covers Riverwoods and neighboring communities across southern Lake County and the North Shore.
Riverwoods projects are coordinated from our Northbrook hub office. We also serve the broader Chicagoland area from our Mundelein and Lombard branches — contact us to discuss your location.
© Concrete Shield Coatings Inc. All rights reserved. | Terms & Conditions | Privacy Policy
